When deploying metropolitan and access networks, air-blown micro cable technology offers great benefits.
The Micronet microduct system enables quick and easy incremental installations of cables.
The capacity of the network can quickly be increased by inserting new cables in spare microducts when needed The system also minimizes the number of fiber splice joints in the network compared to traditional cable solutions.
The Ericsson Micronet Air Blown Cable system consists of
Concentric core Loose tube Micro Cable (GNHLDV) Outdoor, TOL 401 9017+ (Data sheet)
Micro cable based on a slim loose tube design with up to eight tubes per cable. The design facilitates fiber preparation and mid-span access. The cable has excellent bend performance. It is well-suited for long-distance air-blown installation in microducts, with an inner diameter of 10/8 mm or 12/10mm.
Concentric core CFU Micro Cable (GAHLDV), Aerial TOL 401 9001 (Data sheet)
Micro cable based on an extra slim design with up to six compact fiber units (CFU). The design is optimized for the maximum strength required for air blown aerial applications. The cable is specially designed for long distance air-blown installation in microducts with an inner diameter of down to 8mm.
Concentric core Loose tube Micro Cable (GNHLDV), Aerial
TOL 401 9024, G.652.D (Data sheet)
TOL 401 9025, G.657.A2 (Data sheet)
Micro cable based on a slim loose tube design with up to eight tubes per cable and 12 fibers per tube. The cable is available in two different fiber bending qualities. The design is optimized for the maximum strength required for long distance air-blown aerial installation in microducts with an inner diameter of 10/8mm or 12/10mm.
Our Microducts are available for both indoor and outdoor installations.
Thick Walled Microduct Assemblies (Data Sheet)
The thick-walled microduct bundles consist of a number of micro ducts with an inner low friction surface that enables installation of airblown fiber units or fiber optic micro cables such as the Ericsson Ribbonet® and the Ericsson Micronet systems. The thick inner wall of the microducts allow for installation directly into the ground without the need for additional protection.
Protected microducts for Direct Buried installation (Data sheet)
MPB 302 70: Ø 10/8mm
MPB 302 72: Ø 12/10mm
Microduct assemblies with a heavy-duty HDPE sheath that enables direct installation in the ground. The included microducts have a solid, low-friction inner surface coating for best installation performance. Capacity: 1-, 4-, 7-way
Microducts for Duct installation (Data sheet)
MPB 302 60: Ø 10/8mm
MPB 302 62: Ø 12/10mm
Single microducts in two dimensions designed for installation in existing pipes or cable shafts. The microducts have a solid, low-friction inner surface coating for best installation performance. Capacity: 1-way
Protected microducts for Duct installation (Data sheet)
MPB 302 90: Ø 10/8mm
MPB 302 92: Ø 12/10mm
Microduct assemblies with a single HDPE sheath for easy installation of microduct into existing pipes or cable shafts. The included microducts have a solid low friction inner surface coating for best installation performance. Capacity: 4-, 7-way
Protected microducts for Indoor installation (Data sheet)
MPB 302 71: Ø 10/8mm
MPB 302 73: Ø 12/10mm
Microduct assemblies with a sheath made of halogen-free, flame-retardant material that enables installation of outdoor rated micro cables in indoor environments. Fiber splicing between indoor and outdoor environments can therefore be eliminated. Capacity: 1-, 4-, 7-way
Duct Joint Closure, NDE 451 15 (/4-6) (Data sheet)
A series of straight duct closures for maximum protection of duct joints for direct-buried applications. Heat shrink technology is used for maximum protection. The closure is available in three different sizes and includes microduct snap-in connectors for 1, 4 or 7 microducts.
Duct Joint Closure, NDE 451 25+ (Data sheet)
A series of straight duct closures for quick and easy cold seal installation without the need for heat. The closure is available for 1, 4, or 7 microducts. Microduct snap-in connectors are not included.
Protective Duct Joint and Branch Closures, NDE 451 26 (Data sheet)
A series of duct closures for straight jointing or branching of microducts performed with the cold seal method. The design enables excellent mechanical protection and water tightness according to IP class 67, 1m. The duct joints are intended to be installed in handholes / manholes or direct buried. They are available for 1, 4, or 7 microducts. The Sealing kit must be ordered separately.
Duct Joint and Branch Kit, NDE 451 40 (Data sheet)
Flexible kit including materials and tools for cold seal jointing, branching and mid-span of micro/multiducts. A vulcanizing cloth is used for sealing and a strong and flexible PVC tape to provide mechanical protection. Refill kits are available. Microduct snap-in connectors are not included.
MICRODUCT ACCESSORIES (Data sheet) NEW
for jointing, installation and protection of microduct assemblies are available in several dimensions.
End Caps, SRS 1016 17+
Rubber covers used for temporarily seal of unused cable assemblies to avoid water and dust from getting into the ducts. The caps are available in several versions for different types of ducts.
Cleaning sponges, NTM 507 07
to clean the microducts from water and dirt.
Straight Connector, MPB 306 01/10 and /12
Microduct snap-in connectors for quick and easy splicing of microducts. The body is transparent for easy fault location during installation. Dimensions, microducts: Ø10/8mm or 12/10mm
Gas Block Connector, MPB 306 02/10 and /12
Gas block microduct snap-in connectors normally used between indoor and outdoor environments to prevent air flow that may result in condensed water getting into in ducts. After cable installation, the connector can be gas sealed by turning a ring on the body, which is transparent for easy fault location during installation. Dimensions, microducts: Ø10/8mm or 12/10mm
End-stop Connector, SXA 113 9137/10 and /12
Microduct snap-in end stop connectors for permanent or temporarily sealing of unused microducts to prevent water and dust from getting into the duct. The body is transparent for easy fault location during installation. Dimensions, microducts: Ø10/8mm or 12/10mm
Valve End-stop Connector, SXA 113 9151/10
Valve end-stop connector used for pressurizing microducts prior to installation by blowing air into existing ducts. The pressurized duct prevents the duct from collapsing during installation. Dimensions, microducts: Ø10/8mm.
Microduct Connectors and End Caps (Data Sheet)
The direct buried connectors and end stops are intended for fiber optic installations with thick walled microducts. The connectors are used to join sections of microducts. End stops are used to protect open duct ends from water and mud.
Fiber/Duct Joint Closure, NCD 504+ Data sheet
Plastic joint closure for outdoor, direct buried installations. It has a capacity of up to 24 microducts and 2 standard/micro cables. The fiber organizers also cater for fused fiber splitters for PON network applications.
Micronet System Description [0.7 Mb]
Microduct Accessories, Micronet [0.2 Mb]
Duct Joint Closure, NDE 451 25 [0.6 Mb]
Divisible Seals for Microducts [0.4 Mb]
Ericsson Senegal SARL - Km 8, Route de Ouakam - BP 8815 Dakar / Yoff -Sénégal -Téléphone: +221 33 829 30 00