Author(s):
H. Hirsch

IEEE Automatic Speech Recognition & Understanding Workshop, 1997

Download document:
Adaptation of HMMS in the Presence of Additive and Convolutional Noise (pdf)

Abstract:
The performance of speech recognizers deteriorates in case of a mismatch between the conditions during training and recognition.One difference is the presence of a stationary background noise during recognition which is also referred to as "additive" noise. Furthermore the recognition is influenced by the frequency response of the whole transmission channel from the speaker to the audio input of the recognizer. The term "convolutional" noise has been introduced for this type of distortion. Several approaches are known to compensate these effects individually or both together [1]-[4]. This paper describes an approach which compensates both types of noise. The scheme is based on an estimation of the noise spectrum [SI. Furthermore the frequency response is iteratively estimated by using the alignment information of the best path in the Viterbi algorithm. The comparison between the spectra of the input signal and the spectra of the corresponding HMM (Hidden Markov Model) states is taken as basis for the filter estimation. The estimated additive and convolutional noise components are used as input to the well known Parallel Model Combination (PMC) approach [6] to adapt the whole word HMMs of a speaker independent connected word recognizer. Considerable improvements can be achieved in the presence of just one type of noise as well as in the presence of both types together.

Notice:
Copyright 1997 IEEE. Reprinted from 1997. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Ericsson's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.

In order to read PDF files, you need to have Adobe® Acrobat® Reader® installed in your computer. You can download the latest Acrobat® Reader® for free  from Adobe's website.