Our range of fiber optic cables for indoor installation is recommended for use in central office applications.
Here you will find cables for interconnection between the optical line interface (OLT) and the optical distribution frames (ODF). The indoors cables are also suitable for use in LAN networks or other types of data networks.
All indoor cables are halogen-free and flame-retardant, and consequently generate no corrosive gases during combustion. All cables are also completely dielectric. The fibers in the cable can be of different types and different fiber types can be mixed in the same cable.
GNGQBDU, 1-Fiber, TOL 405 3001/1
Simplex, buffered patch cord cable, non-jelly filled with an outer diameter of 2.0 mm as standard. It can be delivered pre-terminated with a variety of connector types. The cable has low shrinkage of less than 0.5% for reliable high performance.
GNGQBDU, 2-fiber, TOL 405 3001/2
Two-fiber, tight-buffered duplex patch cord cable, non-jelly filled and aramid reinforced. The cable has a figure-8 design with single fibers laid in parallel, which makes it easy to split into two simplex patch cables.
GNGQQBDU, 2-fiber, TOL 405 3006
Two fiber, tight-buffered duplex patch cord cable, non-jelly filled and aramid reinforced. Two single fiber cables are enclosed in an outer sheath forming a flexible and dry cable with an outer dimension of 4.8x2.8mm. It can be delivered pre-terminated with a variety of connector types.
GNGQQBDU, 4-fiber, TOL 405 3018
Break-out cable where simplex cables are put into one cable, with aramid yarn as central strength member. The construction results in a robust cable combined with high flexibility. The cable can be delivered pre-terminated with a variety of connector types.
ERICSSON TELECOMMUNICATIONS INC. - 3rd Avenue, Crescent Park West - 1634 Taguig, Metro-Manila -Philippines -Phone: +63 2 7891800