User experience and traffic volumes, mobile networks need to evolve towards providing higher capacities and data rates. In this paper we investigate the feasibility of incorporating higher frequency bands (15 GHz) and beamforming to support this evolution. We see that using user-specific beamforming, the challenging propagation conditions at higher frequencies are mitigated and outdoor-in coverage is often possible. In places where 15 GHz coverage is not satisfactory, swift fallback to a lower frequency band is essential. This is seamlessly provided by carrier aggregation with a 2.6 GHz band. Together these components provide a ten-fold increase in capacity over a reference system operating only at 2.6 GHz.

Full abstract in IEEE Xplore, DOI: 10.1109/PIMRC.2015.7343512

Authors

Fredrik Athley; Sibel Tombaz; Eliane Semaan; Claes Tidestav; and Anders Furuskär.

Download paper

Published 2015-08-30, In Proceedings of 26th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC).

© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.